SD32W Bulldozer

SD32W Bulldozer

SD32W Bulldozer

Introduce:

SD32W Bulldozer
Engine:

Model....................CUMMINS NTA855-C360
Type...................supercharged inline four-stroke in the cold
Cylinder number - bore x trip...................6-139.7x152.4mm
Piston displacement...................14010ml
Flywheel horsepower ...................235kw (320HP)
Rated speed...................2000r/min
Maximum torque................... (1440N.m/1400r/min)
Fuel consumption rate................... 245g/kw.h (180g/Hp.h)
Starting motors...................24v, 11kw
Generators................... 28v, 35A
Battery...................24v (12v x 2)-195AH
Fuel System................... PT pump, top-valve direct injection
Regulators................... centrifugal adjustment for the entire process
Cold (but) system...................centrifugal pumps mandatory cycle, Pai fan
Air Filters...................dry, horizontal, with Air Duster

Weight:

The use of weight...................37200 kg
(With more teeth-tillage)................... 40975 kg

Track:

Assembly type...................Lu single tooth
Pitch...................228.6mm
Width...................560mm
Lu high gear................... 80mm
Tracked plate (each side)................... 41 (each side)
Tracked center distance................... 2140mm
Ground pressure...................0.105MPa

Equipment and accessories:

Direct dumping spade bulldozers...................hydraulic action-operation (accompanying dynamic valve)
Earth-moving board support means...................rod-type, equipped with the right tilt cylinder
Earth-moving shovel width...................4130 mm
A high degree of earth-moving shovel................... 1590 mm
The largest earth-moving shovel enhance high................... 1560mm
The largest decline of earth-moving shovel...................560mm
Tilt of the largest earth-moving shovel................... 1000mm

Three teeth tillage:

Three teeth largest tillage depth...................542mm
The largest increase high................... 883mm
Standard cutting angle...................45 ' (35 ' -63 ' within the scope of no-adjusted)
The largest single tooth tillage depth................... 1250mm
The largest increase high...................965mm

Speed:

Ⅱ Ⅰ stall speed file file file Ⅲ
Forward (km / h) 0 ~ 3.6 0 ~ 6.6 0 ~ 11.5
Back (km / h) 0 ~ 4.4 0 ~ 7.8 0 ~ 13.5

Operating system:

Hoisted way...................character Swing, balance beam suspension structure
Asked Pulley (per side)...................2 (each side)
Round-weight (per side)...................7 (each side)
Guided rounds (each side)................... 1 (each side)

Dimensions:

6880 * 4130 * 3725mm
Other Related Equipment Models: